B&Q - C18Bx 18" Bandsaw With 16'"cutting Depth 3000W Motor
The Cobra bandsaw is modelled on the Laguna 18/BX, but specifically designed for the UK market.It has a one piece frame construction to minimise distortion when the blade is fully tensioned. The mighty 3000w induction motor provides the power to use the full 16” cutting depth. The blade guide system has 5 sealed bearings at the top and 5 underneath the table. Each side of the blade there are 2 bearings allowing for greater support when using wider blades. The rear bearing has a groove in the centre which allows a 3mm blade to be used for Scroll work. All of the bearings have tool free adjustment.The precision ground cast iron table is mounted onto an over sized double cast iron trunnion with two locking points that ensure there is a solid surface to work from. The table tilts to 45° with a positive stop at 90°. In the centre of the table is an aluminium throat plate with 4 adjusting screws to ensure a perfect flush fit.The parallel fence runs smoothly along a polished solid steel bar. Minor adjustments can be made to the position of the rip fence by rotating the micro adjustment screw. The measuring scale is marked in both Inches and Millimetres. The rigid aluminium high/low fence can be installed in 2 ways to ensure full and precise timber support for both large and small work pieces.For crosscutting operations a sliding mitre guide is included. It has an incredible 180 degree rotation with pre-sets stops at 0, 22.5, 30, 45, 60, 67.5 and 90 degrees each way.Supplied with British made 13mm blade, 1.9m cable with industrial 16 amp plug.SPECIFICATION:Maximum Cutting Depth 400mm (16")Throat Width 460mm (18")Max. Cutting Width Using Fence 400mm (16")Table Size (Cast Iron) 500mm x 660mmMotor Input Power 3000w (4hp) / 240v / 50hzBlade length 3673mm (144.6")Blade widths3mm (1/8") to 27mm (1")Assembled Dimensions (WxDxH) 1040mm x 830mm x 2060mmWeight 214kg.
Price now:
£1,795.00
B&Q - C18Bx 18" Bandsaw With 16'"cutting Depth 3000W Motor
The Cobra bandsaw is modelled on the Laguna 18/BX, but specifically designed for the UK market.It has a one piece frame construction to minimise distortion when the blade is fully tensioned. The mighty 3000w induction motor provides the power to use the full 16” cutting depth. The blade guide system has 5 sealed bearings at the top and 5 underneath the table. Each side of the blade there are 2 bearings allowing for greater support when using wider blades. The rear bearing has a groove in the centre which allows a 3mm blade to be used for Scroll work. All of the bearings have tool free adjustment.The precision ground cast iron table is mounted onto an over sized double cast iron trunnion with two locking points that ensure there is a solid surface to work from. The table tilts to 45° with a positive stop at 90°. In the centre of the table is an aluminium throat plate with 4 adjusting screws to ensure a perfect flush fit.The parallel fence runs smoothly along a polished solid steel bar. Minor adjustments can be made to the position of the rip fence by rotating the micro adjustment screw. The measuring scale is marked in both Inches and Millimetres. The rigid aluminium high/low fence can be installed in 2 ways to ensure full and precise timber support for both large and small work pieces.For crosscutting operations a sliding mitre guide is included. It has an incredible 180 degree rotation with pre-sets stops at 0, 22.5, 30, 45, 60, 67.5 and 90 degrees each way.Supplied with British made 13mm blade, 1.9m cable with industrial 16 amp plug.SPECIFICATION:Maximum Cutting Depth 400mm (16")Throat Width 460mm (18")Max. Cutting Width Using Fence 400mm (16")Table Size (Cast Iron) 500mm x 660mmMotor Input Power 3000w (4hp) / 240v / 50hzBlade length 3673mm (144.6")Blade widths3mm (1/8") to 27mm (1")Assembled Dimensions (WxDxH) 1040mm x 830mm x 2060mmWeight 214kg.
Price now:
£1,795.00
This site contains affiliate links for which we may be compensated.
Product Description
The Cobra bandsaw is modelled on the Laguna 18/BX, but specifically designed for the UK market.It has a one piece frame construction to minimise distortion when the blade is fully tensioned. The mighty 3000w induction motor provides the power to use the full 16” cutting depth. The blade guide system has 5 sealed bearings at the top and 5 underneath the table. Each side of the blade there are 2 bearings allowing for greater support when using wider blades. The rear bearing has a groove in the centre which allows a 3mm blade to be used for Scroll work. All of the bearings have tool free adjustment.The precision ground cast iron table is mounted onto an over sized double cast iron trunnion with two locking points that ensure there is a solid surface to work from. The table tilts to 45° with a positive stop at 90°. In the centre of the table is an aluminium throat plate with 4 adjusting screws to ensure a perfect flush fit.The parallel fence runs smoothly along a polished solid steel bar. Minor adjustments can be made to the position of the rip fence by rotating the micro adjustment screw. The measuring scale is marked in both Inches and Millimetres. The rigid aluminium high/low fence can be installed in 2 ways to ensure full and precise timber support for both large and small work pieces.For crosscutting operations a sliding mitre guide is included. It has an incredible 180 degree rotation with pre-sets stops at 0, 22.5, 30, 45, 60, 67.5 and 90 degrees each way.Supplied with British made 13mm blade, 1.9m cable with industrial 16 amp plug.SPECIFICATION:Maximum Cutting Depth 400mm (16")Throat Width 460mm (18")Max. Cutting Width Using Fence 400mm (16")Table Size (Cast Iron) 500mm x 660mmMotor Input Power 3000w (4hp) / 240v / 50hzBlade length 3673mm (144.6")Blade widths3mm (1/8") to 27mm (1")Assembled Dimensions (WxDxH) 1040mm x 830mm x 2060mmWeight 214kg.
Product Specifications
General | |
|---|---|
battery technology | n/a |
colour | blue |
motor type | brushless |
number of items in set | 1 |
power source | electric |
set includes | british made 13mm blade, push stick, mitre guide, 1.9m cable with 16 amp plug. |
suitable for | wood |
type | woodworking bandsaw |
voltage | 240v |
Brand | Charnwood |
Material | cast iron/aluminium |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.